Solar 24 Volt Sliding Gate Kit

The Letron DIY 24 Volt Heavy Duty Solar Sliding Gate kit is Australian designed for harsh Australian conditions. The components and materials used in the circuit boards are the latest technology and of the highest quality and protected with a UV plastic cover.

The motor has CNC cut all metal to ensure reliability. The high quality 40 watt solar panel and 2 x 9Amp, 12 Volt batteries will ensure your solar gate opener is always ready to operate.

The Letron gate opener kit is designed for easy installation by either the handyman, or professional gate and fencing contractor. An electrician is not required.

The Sliding Gate kit will open a gate up to 4.5 Metres and weighing 600 KG

The automatic Sliding Gate Opener has the following features:

• Operation - To operate the slider gate simply press the remote control or wall mounted switch for two seconds and the gate will automatically open or close.
• Safety Obstruction Reverse - The gate can be stopped when opening or closing by pressing he remote control. The next activation will move the gate in the opposite direction.
• When the gate is closing and hits an obstacle or is restricted in some manner, it will automatically reverse. The amount of force the gate should encounter is adjustable.
• The gate will automatically stop if restricted when opening. The Safety Obstruction Forces should be checked at least once a month.
• Security Code Store - The Sliding Gate Motor uses state of the art Microchip technology in storing your Slider Transmitter Security Code.
• Codes are simply entered or deleted when required.
• Up to 20 different transmitters can be stored in the non-volatile memory device.
• Security is enhanced because of the fixed and encrypted sections combined increase the combinations to 7.38 x 10/9. There is no dip switch on the motor which can be seen or copied.
• Auto Close Mode - The Slider Gate Motor can be programmed to automatically close after a set period (up to 60 seconds) after the gate has opened. A photo-electric beam must be installed if this mode is selected.
• Photo-Electric Beam - The Sliding Gate Motor has an input for a Photo-Electric beam to be connected for extra safety protection.

Solar Single Swing Gate Kit contains:

• Motor
• Sliding Gate Circuit Board 
• 2 x 9amp, 12 volt batteries
• 40 Watt Solar Panel
• 4 Metres of gear track
• 2 Remote Controls
• Manual Release Key
• Instruction Manuel
• Separate battery charge controller