DC Sliding Gate Opener

No Need for mains {240V) power to the Gate site each DC Heavy Duty sliding gate kit includes 15V power supply. Run low voltage wire to  your nearest 240V outlet (let us know distance from power) Running low voltage wire is safe and can even be stapled along the fence line or run in conduit just under the ground.

The letron DIY DC Heavy Duty Sliding Gate Kit is Australian designed for harsh Australian conditions. The components and materials used in the circuit are the latest technology, of the highest quality and protected with a plastic cover. The CNC cut all metal gears to ensure reliability.

The Letron gate sliding gate opener is designed for easy installation by either the handyman, or professional gate and fencing contractor.

A DC Sliding Gate Kit will open a gate up to 4.5 Metres and weighing 600 Kg.

An electrician is not required.

The DC automatic Sliding Gate Opener has the following features.

• Operation - To operate the sliding gate simply press the remote control or wall mounted switch for two seconds and the gate will automatically open or close.
• Safety Obstruction Reverse - The gate can be stopped when opening or closing by pressing the remote control or wall mounted switch. The next activation will move the gate in the opposite direction.
• When the gate is closing and hits an obstacle or is restricted in some manner, it will automatically reverse. The amount of force the gate should encounter is adjustable.
• The gate will automatically stop if restricted when opening. The safety Obstruction Forces should be checked at least once a month.
• Security Code Store - The sliding gate motor uses state of the art Microchip technology in storing your Slider Transmitter Security Code.
• Codes are simply entered or deleted as required.
• Up to 20 different transmitters can be stored in the non-volatile memory device.
• Security is enhanced because of the fixed and encrypted sections increase the combinations to 7.38 x10/9. There is no dip switch on the motor which can be seen or copied.
• Auto Close Mode - The Slider Gate Motor can be programmed to automatically close after a set period (up to 60 seconds) after the gate has opened. A Photo-Electric Beam must be installed if this mode is selected.
• The sliding gate motor has a Photo-Electric Beam to be connected for extra safety protection.

The DC Automatic Sliding Gate Opener Kit contains:

• 1 x Motor
• 1 x Sliding Motor Circuit Board with Plastic Cover.
• 1 x 15V Power Supply
• 1 x 9 amp 12 volt battery (backup)
• 2 x Remote Controls 
• 4 x metres of Gear Track
• 1 x Manual Release Key 
• 1 x Instruction Manual